FAQs

WHIRLPOOL SYSTEM – Must be fitted to a 13 amp fused spur connected outside of the bathroom.

AIRSPA SYSTEM - The blower is supplied loose and is designed to sit on the floor in a convenient position to enable removal when necessary. The blower is connected to the flexible pipe by means of a hose clip or cable tie. There is a length of clear pneumatic tube that connects to the chrome on/off button and to the vacuum switch in the body of the blower.

DUAL SYSTEM (WHIRLPOOL AND AIR SYSTEM) – The 2 supply cables from the pump and the blower can be connected to the same 13 amp fused spur.

LIGHTS - The power to the light is converted from the mains supply to 12v current and this is done in a transformer box. The cable to the transformer box (red for live and white for neutral) should be connected to a 3 amp fused spur or into the lighting system if convenient.

CHROMATHERAPY LIGHT OPERATION - Should be pressed on and then off. Each time this will stop on one of the seven colours…GREEN, ORANGE, RED, VIOLET, BLUE, YELLOW, INDIGO. To start the FADE PROGRAMME, the on/off touch should be pressed for 2 seconds.

ON/OFF CONTROL - You should press the button in the centre of the chrome on/off to turn the system on and again to turn off.

AIR CONTROL - Should be turned around to adjust ie gentle when turned off (only water circulation) or open to the required level allowing air to mix at the jet with the water (JACUZZI EFFECT) giving a more vigorous massage.

CLEANING & MAINTENANCE – In order to maximize the efficiency of your system and for hygiene purposes, a whirlpool cleaner must be used on a regular basis (we recommend every 4 to 6 weeks). After each use a sterilising tablet should be used. Household disinfectants and bleaches are not recommended as they could cause damage to the pump. Please see our leaflet ‘Oils and Cleaners’ that was sent with your order confirmation.